MDS SERIES - Description
MASCOT MDS series hydraulic motors are developed for high speed applications and perform with high efficiency in tough conditions. These motors find uses mainly in Wagon Tippler, Side Arm Charger, Slew Drive and Paddle Feeder. These motors are exclusively developed for Wagon Tippler, Side Arm Charger & Paddle Feeder Hydraulic Drive Application due to high radial & Axial Load capacity. In addition, these motors are also most suited for use in Feeder Breaker, Ball Mills and Bowl Mills. Optionally, a brake can be fitted in the rear end of the motor. The motor displacements available range from 9 lit/rev. to 15 lit/rev. They aim to provide a wide variety of precise hydraulic motor and pump combinations. These motors can take heavy shock loads due to the incorporation of a robust front bearing arrangement.
OPTIONS
- Customised shaft.
- Integral multi plate disc brake (Static / Parking).
- High speed versions.
- Double shaft.
- Through hole shaft of various sizes.
- Custom finish.
- Deep water submersible.
- Non magnetic material.
- Dual Displacement.
- Shrink disc coupling
- Shaft or Flange mounting
FEATURES
- Long Life
- High Mechanical Efficiency
- Constant torque output
- Smooth low speed performance < 1rpm
- Resistance to thermal shock
- Double shaft sealing
- Shock Resistance
- Low noise
- Corrosion resistant material.
MDS SERIES - Technical Specification
HYDRAULIC MOTOR - MASCOT
| MOTOR | SPECIFICATION | |||||
|---|---|---|---|---|---|---|
| FRAME SIZE | DISP(*) PER REV | TORQUE ( THEORETICAL ) | TORQUE MAX | SPEED RATED | SPEED MAX ** | PRESSURE RATED |
| METRIC | CM3 /REV | NM/BAR | NM | RPM | RPM | BAR |
| HMS 9.0 | 9080 | 144 | 47520 | 80 | 120 | 345 |
| HMS13.5-15.0 | 13540 | 215 | 70950 | 75 | 110 | 345 |
** High speed version upon request.
* Any other displacement upon request.
MDS SERIES - Dimensional Specification
Dimensions: Motors External Shaft with Male Splines
| Motor Type | A (MM) | B (MM) | DW (MM) | D (MM) | E (MM) | WEIGHT (KG) | MAIN CONNEC. (A1,A2,C1,C2) | DRAIN CONNEC. (D1,D2) |
|---|---|---|---|---|---|---|---|---|
| HMS 9.0 | 667 | 898 | N150x5x30x28x10B | 171 | 575 | 678 | SAE 1¼ " | BSP ¾ " |
| HMS 13.5 | 710 | 898 | N150x5x30x28x10B | 171 | 575 | 772 | SAE 1¼ " | BSP ¾ " |
Brake : Static / Parking
| Motor Type | A (MM) | B (MM) | C (MM) | D (MM) | BRAKE RELEASE PRESSURE (BAR) | BRAKE TORQUE MAX (NM) |
|---|---|---|---|---|---|---|
| HMS 9.0 | 374 | 152 | 64.5 | 187 | 20-30 BAR | 42,000 |
| HMS 13.5 | 374 | 152 | 64.5 | 187 | 20-30 BAR | 50,000 |
* Technical Dimensions are subjected to change without prior notice.